Asset quality tells us how well a bank manages the money it lends to people and businesses. Banks earn a large part of their income through loans. They lend money to individuals, companies and small businesses. In return, borrowers must repay the loan with interest within a set period.
However, not every borrower can repay on time. Some people may lose their jobs, some businesses may face losses, and some companies may fail to repay their loans. When this happens, the bank may face a loss.
This is why asset quality matters. It helps us understand whether a bank gives loans to people who can repay them or whether a large part of its money is at risk.
For example, suppose a bank gives loans worth ₹100 crore. Out of this amount, borrowers repay ₹95 crore as per the agreed terms, but loans worth ₹5 crore face serious repayment problems. This means the bank has some bad loans, and it must take steps to deal with them.
A bank with good asset quality usually has fewer bad loans, a strong record of loan recovery and enough money set aside to cover possible losses. On the other hand, poor asset quality can hurt its profits and financial health.
Why Is Asset Quality Important?
A bank’s main job is to accept deposits and provide loans. It earns interest from borrowers and pays interest to depositors. The difference between these two amounts is an important source of income for the bank.
But what happens when borrowers fail to repay their loans?
The bank may lose both the principal amount and the interest it expected to receive. It may also have to set aside some money to cover the possible loss. This amount is known as a provision.
High bad loans can reduce a bank’s profit. They can also put pressure on its capital and make it harder for the bank to offer new loans.
For investors, asset quality is an important part of bank analysis. A bank may report high profits and strong loan growth, but these numbers do not tell the full story. If many borrowers fail to repay their loans, the bank may face trouble in the future.
That is why it is important to look at asset quality before you decide whether a bank is financially strong.
1. Gross NPA (GNPA)
NPA stands for Non-Performing Asset. It refers to a loan where the borrower has failed to pay the required principal or interest for more than 90 days, subject to the applicable rules.
In simple words, when a borrower does not pay the bank for more than 90 days, the loan generally becomes an NPA.
Gross NPA, or GNPA, shows the total value of such bad loans before the bank deducts any provisions.
The formula is:
GNPA Ratio = (Gross NPAs / Gross Advances) × 100
Let us understand this with an example.
Suppose a bank has total loans worth ₹1,000 crore. Out of this amount, ₹40 crore consists of bad loans.
GNPA Ratio = (₹40 crore / ₹1,000 crore) × 100
GNPA Ratio = 4%
This means 4% of the bank’s total loans are bad loans.
A lower GNPA ratio is usually a good sign because it means a smaller part of the bank’s loan book has serious repayment problems.
However, do not judge a bank only by its current GNPA. You should also check whether this ratio has gone up or down over the last few quarters and years.
For example, if a bank’s GNPA falls from 5% to 3%, it may show an improvement in its asset quality. But you should also check whether this fall came from actual loan recovery or from loan write-offs.
2. Net NPA (NNPA)
Net NPA, or NNPA, shows the value of bad loans after the bank deducts the provisions it has already made for them.
Banks know that some borrowers may fail to repay their loans. To deal with this risk, they set aside a part of their money as provisions. These provisions help cover possible losses.
Let us take a simple example.
Suppose a bank has gross NPAs worth ₹40 crore. It has already set aside ₹25 crore as provisions.
The remaining amount is:
₹40 crore – ₹25 crore = ₹15 crore.
This ₹15 crore is the net NPA amount in this simplified example.
The formula is:
NNPA Ratio = (Net NPAs / Net Advances) × 100
Net advances refer to loans after the relevant deductions, as per the applicable reporting method.
A lower NNPA ratio is generally better because it means the bank has fewer bad loans left after its provisions.
For investors, this ratio helps show how much bad-loan risk remains after the bank accounts for its expected losses.
A bank may have a high GNPA but a much lower NNPA if it has made strong provisions. This does not mean its bad loans are harmless, but it does show that the bank has set aside more money to cover possible losses.
3. Provision Coverage Ratio (PCR)
Provision Coverage Ratio, or PCR, tells us how much of a bank’s gross NPAs are covered by provisions.
In simple words, it shows how much money the bank has set aside against its bad loans.
The formula is:
PCR = (Total Provisions / Gross NPAs) × 100
Suppose a bank has gross NPAs worth ₹100 crore and has made provisions of ₹75 crore.
PCR = (₹75 crore / ₹100 crore) × 100
PCR = 75%.
This means the bank has set aside money equal to 75% of its gross NPAs.
A higher PCR is generally a good sign because it shows that the bank has a stronger cushion against possible losses from bad loans.
However, PCR should not be viewed on its own. You should also check the bank’s GNPA, NNPA, profit and capital position.
For example, a bank with a PCR of 85% may have a better safety cushion than a bank with a PCR of 60%, if other factors are similar.
4. Slippage Ratio
The slippage ratio tells us how many fresh loans have turned into NPAs during a particular period.
A loan may start as a regular loan, but the borrower may later face financial problems. If the borrower fails to pay the required amount for more than 90 days, the loan may become an NPA.
These newly formed bad loans are called fresh NPAs or slippages.
The formula is:
Slippage Ratio = (Fresh NPAs / Standard Advances at the Beginning of the Period) × 100
Suppose a bank has standard advances worth ₹1,000 crore at the start of the year. During that year, loans worth ₹20 crore turn into NPAs.
Slippage Ratio = (₹20 crore / ₹1,000 crore) × 100
Slippage Ratio = 2%.
This means fresh NPAs equal 2% of the bank’s standard advances at the start of the year.
A lower slippage ratio is usually better because it means fewer regular loans have turned into bad loans.
This ratio is useful because it helps us understand the current health of a bank’s loan book. While GNPA shows the total bad loans, the slippage ratio tells us how many new loans have become bad during a specific period.
If the slippage ratio rises over several quarters, it may be a warning sign. It could mean that more borrowers face trouble with loan repayment.
5. Restructured Loans
Restructured loans are loans whose terms have changed because the borrower faces financial problems.
For example, a person may take a home loan for 15 years. Later, due to a loss of income, the person may find it hard to pay the monthly instalments. The bank may agree to extend the loan period or change the repayment terms.
A company may also ask the bank for more time to repay its loan after it faces business losses.
Some common changes include a longer repayment period, lower instalments or a change in the repayment schedule.
Restructuring does not always mean that a loan is an NPA. However, a high level of stressed or restructured loans may show that many borrowers face financial trouble.
This is why investors should check the value of restructured loans along with the bank’s other asset quality figures.
How to Read All These Ratios Together
Each asset quality measure tells us something different about a bank.
GNPA shows the total value of bad loans before provisions. NNPA shows the bad loans that remain after provisions. PCR tells us how much of the bad-loan amount the bank has covered with provisions.
The slippage ratio shows how many fresh loans have turned into NPAs during a period. Restructured loans help us understand how many borrowers need changes to their original loan terms due to financial problems.
You should not use just one ratio to judge a bank. All these measures work together and give a clearer picture of its loan quality.
Example: How to Analyse a Bank’s Asset Quality
Suppose you want to study ABC Bank. Its asset quality figures are as follows:
GNPA: 2.5%
NNPA: 0.6%
PCR: 85%
Slippage Ratio: 1.2%
These figures suggest that ABC Bank has a fairly healthy asset quality position.
Its GNPA of 2.5% means that a relatively small part of its total loans falls under the NPA category. Its NNPA of 0.6% shows that the bad-loan amount left after provisions is also low.
The PCR of 85% means that the bank has set aside provisions equal to 85% of its gross NPAs. This gives it a strong cushion against possible losses.
Its slippage ratio of 1.2% also suggests that the share of fresh NPAs is relatively low.
Based on these figures, ABC Bank appears to have good control over its bad loans. However, you should also check its past results, loan growth, capital strength and profit before you reach a final conclusion.
These figures are only examples and do not refer to any real bank.
How to Compare Two Banks
Asset quality becomes even more useful when you compare two banks.
Suppose Bank A and Bank B have the following figures:
Bank A: GNPA 2%, NNPA 0.5%, PCR 90% and slippage ratio 1%.
Bank B: GNPA 5%, NNPA 2%, PCR 65% and slippage ratio 3%.
Based on these figures, Bank A appears to have better asset quality.
Its GNPA is lower, which means a smaller part of its loan book consists of bad loans. Its NNPA is also lower, so the uncovered bad-loan amount is smaller.
Bank A has a PCR of 90%, compared with 65% for Bank B. This means it has made higher provisions against its gross NPAs.
Its slippage ratio is also lower. This suggests that fewer regular loans have turned into bad loans during the period.
Therefore, Bank A appears stronger than Bank B on these asset quality measures.
However, a fair comparison also requires you to check the type of loans each bank offers. A bank that gives more loans to large companies may face different risks from a bank that mainly offers home loans, car loans and personal loans.
Five Things to Check Before You Invest in a Bank
Before you invest in a bank, take a close look at its asset quality over several quarters and years.
First, check its GNPA trend. If the ratio falls over time, it may show that the bank has better control over its bad loans. But make sure the fall is not only due to loan write-offs.
Second, check the NNPA ratio. A lower figure means that fewer bad loans remain after the bank sets aside provisions.
Third, look at the PCR. A higher ratio is generally better because it shows that the bank has made more provisions against its bad loans.
Fourth, check the slippage ratio. If this figure rises sharply, it may mean that more regular borrowers have failed to repay their loans.
Finally, check loan recoveries and write-offs. Recoveries show how much money the bank has received from borrowers who had failed to repay their loans. Write-offs refer to loans that the bank removes from its books as per the applicable rules. A write-off does not always mean that the bank has stopped all efforts to recover the money.
These five checks can help you understand whether the bank has made real progress or whether its asset quality problems still exist.
What Does a Good Bank Look Like?
A bank with good asset quality usually has a low GNPA ratio, a low NNPA ratio, a high PCR and a low slippage ratio.
It also has a good record of loan recovery and proper control over its lending risks.
However, no single number can tell you whether a bank is safe or a good investment. You must also look at its profits, capital adequacy, deposit base, loan growth and management quality.
A bank may have low NPAs today but may face problems in the future if it gives too many risky loans. That is why past performance and current trends both matter.
Final Thoughts
Asset quality is one of the most important parts of bank analysis. It tells us whether a bank’s loans are healthy and whether borrowers repay their debts on time.
GNPA and NNPA help us understand the level of bad loans. PCR shows how much money the bank has set aside to cover possible losses. The slippage ratio tells us how many fresh loans have turned into NPAs. Restructured loans give us an idea of the financial stress faced by some borrowers.
The basic rule is simple: lower GNPA, lower NNPA, higher PCR and lower slippages are generally good signs.
If you check these figures together and compare them over time, you can get a much clearer idea of a bank’s financial health. A good bank is not simply one that gives more loans. It is one that gives loans with care, gets its money back and has enough funds to deal with possible losses.
ALSO READ: US Markets Face a Sharp Fall as Tech Stocks Lead Decline